Before you begin please contact Customer Support at 1-877-531-7498 to set up your new account. Note: While you're setting up your new account please keep in mind usernames can be numbers and/or letters only, no spaces, start with a letter and be 12 characters maximum in length. Passwords can be numbers and/or letters only, no spaces, can start with either a number or letter, be 12 characters maximum in length and are case sensitive.

Set Up the Connection Icon

1. Click on Apple Menu>Internet Access>Internet Setup Assistant. The Internet Setup Assistant appears.
   
2. It will ask you, "Would you like to set up your iMac to use the internet?" Click Yes.
3. Next it asks, "Do you already have an internet account?" Click Yes.
4. The next screen that pops up is the Introduction. Click on the right arrow.
5. It will ask you, "What would you like to name this configuration?" Name it whatever you like such as EagleNet. For the section, "How will you be connecting to the Internet?" make sure there is a dot next to Modem. Click the right arrow.

6. Then comes the Modem Settings screen. For Modem: and Port:, you should leave the default settings. Select whether your phone line uses Tone or Pulse dialing. You may leave Ignore dial tone? Blank. Click the right arrow.

7. Next is Configuration Information. Enter the number that is local to you from the list below.

   Local Internet Access Numbers for All Accounts	up to v.90 56k modems	ISDN
   Holland/Zeeland areas:	395-5292	395-5292
   Grand Rapids, Rockford areas:	451-2261	451-2261
   Grand Haven, Ferrysburg, Spring Lake areas:	850-8522	850-8511
   Cedar Springs and Sand Lake areas:	696-0840	N/A

8. For your user ID, type the temporary user name: "visitor". For password, type the temporary password: "eagle". Click the right arrow.
   

9. PPP Connect Scripts is the next screen that appears. Under, "Does your ISP require that you use a PPP Connect Script when you log in?" Make sure No is checked. Click the right arrow.

10. Next comes IP Address. Make sure there is a check next to No. Click the right Arrow.
11. Next is Domain Name Servers. The first box is the primary DNS, type: 208.159.114.2. Click Return on your keyboard. Type the secondary DNS: 208.159.114.6. You may leave the Domain Name box blank. Click the right arrow.
    
12. Then comes E-mail Address and Password. You will not have this information until after you have filled out the online application. You may leave this blank for now and click the right arrow.
13. Next is E-mail Account and Host Computer. Again, you will have to leave the e-mail address blank until you have signed up for your account. In the e-mail host type mail.egl.net. Click the right arrow.
14. Newsgroup Host Computer is next. Type news.egl.net. Click the right arrow.
15. Proxies is the next screen. Make sure there is a check next to No.
16. The final screen comes up, Conclusion. You may leave the check in the box next to Connect when finished, and click Go Ahead.
17. You are now ready to sign-up. If you have not already contacted EagleNet Customer Support you may do so by calling 1.877.531.7498 to register for your new account. Once your account is created disconnect and login with your new account information.
18. You will need to edit your user name and password. Click Apple Menu>Control Panels>Remote Access. In the box next to Name: enter the new user name you created. In the box next to Password: enter the new password you created. You are ready to go!
    

Thanks for choosing EagleNet. Find information on billing procedures as well as other services we offer here.